點擊圖片放大商品名稱:
屋頂式軸流抽風機
詳細介紹:
屋頂式軸流抽風機 roof type shaft exhauster
特點：材質為FRP, 耐腐蝕、壽命長。
Specialties：FRP material,anti corrosion long lasting.
馬力 HP | 1HP |
電壓 POWER SOURCE | 220V |
重量 WEIGHT | 18KG |
＊不含馬達重量
＊Weight excluding motor
單位 unit : mm
A | 630 |
B | 160 |
C | 410 |
D | 710 |
E | 640 |
F | 60 |
更多商品
渦輪自然通風器
渦輪自然通風器 turbine natural ventilator 適用場所各式廠房、倉庫、建築大樓、店面、住家等皆可安裝。 Applicable scopeFor various factories, warehouses, buildings, stores, residents etc.. 尺寸齊全、歡迎洽詢 VARIOUS OPTIONAL SIZES. YOU ARE WELCOME TO CONTACT US.
水洗式空氣清淨集塵機
水洗式空氣清淨集塵機waste wash air cleaner 本機為水洗式集塵器，經中央標準局核定在案，與一般所不同是免用過濾網、集塵袋及噴嘴之設計。清洗、維護非常簡單方便．在處理各種廢氣時更能產生極佳效果This machine is a water washing dust collector, and has been approved by National Bureau of Standards. Its difference from some others is unnecessary to have the design of filtering net, dust collecting bag and spray nozzle. It\'s very simple and handy to clean and maintain. When disposing various gases, it can bring about better effect. 適用場所1. 塑膠、橡膠工廠。2. 印版乾燥爐之廢氣。3. 餐廳大廚房之油煙。4. 熱處理工廠之油煙。5. 爐灰廢氣處理。6. 噴漆粉氣一般水洗台無法洗淨之廢氣。7. 電子工廠之自動焊錫爐。 8. 除臭味紡織工廠乾燥爐。9. 酸、鹼製程之廢氣處理。 The places it can be applied. 1. Plastic and rubber factory.2. The waste gas of printing dryer. 3. The greasy dirt from kitchen of restaurant. 4. The greasy dirt of heat treatment factory.5. The disposal of furnace ashes and waste gas. 6. The spray painting\'s waste gas which some other water washing stand can not wash cleanly. 7. The automatic welding and washing furnace of electronic factory.8. The dega3ng dryer of textile factory. 9. Acid, alkali production waste gas treatment
濾袋式集塵器
濾袋式集塵器 dust bag collector 特點1.集塵效率高。2.附活動輪，移動方便。 Specialties1. High dust collection capability.2. With movable wheels for easy transpo 規格 SPEClFlCATlON 產品代號Model 馬 力HP 電 壓Power Source 處理風量 Alr Volume 靜壓Statlc Pressure 口 徑Callber BL023 1/2HP 220~380V 8 m3/ min 50mmAg 2"x2支 BL024 1HP 220-380V 20 m3/ min 60mmAq 2 1/2"x2支 BL025 2HP 220-380V 27 m3/ min 100mmAq 3"1/2"x3支 BL026 3HP 220-380V 30 m3/ min 100mmAq 3"1/2"x3支 BL027 5HP 220-380V 60 m3/ min 150 mmAq 3"1/2"x6支 註：電壓可指定。Customer\'s dominated voltage acceptable.
環保廢氣處理機
環保廢氣處理機 waste gas environmental disposal machine 特點 1. 可用鋁製風管取代鐵皮風管。2. 過濾效果佳，濾材壽命長。符合現今環保排放標準。3. 產品規格化，交貨迅速。 Features1. Steel pipe line could be replaced With aluminum pipe line. 2. High filter result, long lasting filter material. Meets current environmental requirements.3. Products standardized, prompt deliv. 用途 1. 乾燥爐之廢氣處理站。2. 自動悍錫爐之廢氣處理。3. 微細粉塵之集塵。 4. 異味、有機溶劑、有害氣體…等廢氣處理。 Functions1. Waste gas treatment for oven. 2. Waste gas treatment for automatic welding furnace. 3. Fine dust collection .4. Odor, organic solvent, poisonous gas etc. treatment 規格 SPEClFlCATlON 產品代號Model 馬 力HP 電 壓Power Source 尺寸(mm) Dimension 處理能力Treatment Capacity 重 量Welght 口 徑 (in)Callber BL018 2HP 220~380V L1000xW650xH1120 20 ~25 m3/min 250kg 8" BL019 3HP 220-380V L1000xW650xH1120 25 ~ 30 m3/ min 300kg 8" BL020 5HP 220-380V L1000xW650xH1120 30 ~ 35 m3/ min 350kg 8" BL021 7 1/2 HP 220-380V L1100xW900xH1120 40 ~ 45 m3/ min 400kg 10" BL022 10HP 220-380V L1100xW900xH1120 45 ~ 50 m3/ min 450kg 10" 註： 電壓可指定。 Customer\'s dominated voltage acceptable.
配管範例
配管範例 piping example
抽風系統之動力主機
抽風系統之動力主機 main power unit of ventilation svstem 1. 廢氣入口 Waste gas inlet 2. 不織布 Non-woven fabrics 3. 活性碳 Active carbon 4. 抽風機 Induced draft fan 5. 消音器 Muffler 6.排氣口 Exhaust port 特點 1. 吸風口直接裝於烙鐵上，吸煙效率高。2. 適用於各種烙鐵，按裝方便。3. 以 PVC 管代替鐵皮風管，降低成本。4. 不會影響廠房空調系統。5. 排放之廢氣符合現今環保排放標準。 Features 1 .Suction is directly installed on the soldering iron with high suction result.2. Applicable for various soldering iron, easy installation. 3. Cost reduction with PVC pipe instead of steel pipe. 4. Will not effect the existing ventilation system. 5. Waste gas disposal meets the current environmental requirements 多層過濾消音吸塵器multi lavers filter noise absorbing vacuum cleane規格 SPEClFlCATlON 產品代號Model 馬 力HP 電 壓Power Source 尺寸(mm) Dimension(L×W×H) 建議烙鐵數Wumber of Soldering lron 噪 音Nolse 重 量Welght 口 徑Callber BL013 1/2HP 3ψ 220~380V 720x530x1000 15 63dB 100kg 3" BL014 1HP 3ψ 220-380V 720x530x1000 20 63dB 100kg 3" BL015 2HP 3ψ 220-380V 1000x650x1200 40 65dB 250kg 4" BL016 3HP 3ψ 220-380V 1000x650x1200 50 65dB 250kg 4" BL017 5HP 3ψ 220-380V 1200x780x1300 80 68dB 350kg 4" 註： 1.電壓可指定。2.建議烙鐵數依管路長度、烙數、瓦數而增減。1.Customer\'s dominated voltage acceptable. 2.It is suggested to adjust the number of soldering iron in accordance to the length of pipe line, soldering number, voltage.
抽風系統之配件
抽風系統之配件 fittings of this air draft svste
整廠烙鐵錫煙處理設備
整廠烙鐵錫煙處理設備 factory work sity soldering iron tin treatment
